by admin | Aug 12, 2026
Kobra X and Kobra 4 poop bin with Digital MakerOnline Waste “poop” bin for the Anycubic Kobra X and Kobra 4, now with a built-in temperature and humidity meter. The bin is form-fitting for a clean, exact fit beside the printer. Ventilation openings were created using...
by admin | Aug 12, 2026
Kobra X Nozzle Storage Holder MakerOnline This is a nozzle holder that holds Raccoon Engineering Nozzle containers (available here). These are the same size as nozzle containers available online with many aftermarket nozzles. Has seperate front name plate that can...
by admin | Aug 12, 2026
Kobra X Gantry Lighting MakerOnline Add lighting to your project on your Kobra X printer. Version 2 note. Added a little extra clearance for printhead variations. ~ Thanks Christian Uses standard 8mm COB and FCOB lighting. Can be powered of the Kobra USB port or any...
by admin | Aug 12, 2026
Kobra 4 Gantry Lighting MakerOnline Add lighting to your project on your Kobra 4 printer. This does NOT work with the Kobra X. Kobra X Version available here Uses standard 8mm COB and FCOB lighting. Can be powered of the Kobra USB port or any USB wall adapter or...
by admin | Aug 12, 2026
Kobra X and Kobra 4 Stray Redirector MakerOnline Worried about filament strands falling off the back of your build plate near the nozzle wiper and into the Y axis slot? It happens. I just took off my bottom cover recently and was surprised the amount of filament...
