by admin | Aug 12, 2026
Bandit Cam – Kobra 4 Camera Relocation Kit MakerOnline This is a camera relocation kit for the Kobra X printer. It moves the camera to a higher mounting position for a better viewing angle. It also improves camera exposure by reducing light reflections off the...
by admin | Aug 12, 2026
Kobra X and Kobra 4 Side Spooler MakerOnline This is a complete system to side mount the spools on the Kobra X and Kobra 4. (See note about Kobra 4 at the bottom of this description). Relocating your factory top mount spools lowers the overall center of gravity of the...
by admin | Aug 12, 2026
Kobra X and Kobra 4 poop bin with Digital MakerOnline Waste “poop” bin for the Anycubic Kobra X and Kobra 4, now with a built-in temperature and humidity meter. The bin is form-fitting for a clean, exact fit beside the printer. Ventilation openings were created using...
by admin | Aug 12, 2026
Kobra X Nozzle Storage Holder MakerOnline This is a nozzle holder that holds Raccoon Engineering Nozzle containers (available here). These are the same size as nozzle containers available online with many aftermarket nozzles. Has seperate front name plate that can...
by admin | Aug 12, 2026
Kobra X Gantry Lighting MakerOnline Add lighting to your project on your Kobra X printer. Version 2 note. Added a little extra clearance for printhead variations. ~ Thanks Christian Uses standard 8mm COB and FCOB lighting. Can be powered of the Kobra USB port or any...
