Store Menu >>
Store Menu >>
Filament Storage Bag (complete System)
OVV3D 3D printer filament storage kit contains: filament bags*30, 60 KPA automatic air pump*1, reusable non-toxic desiccants*30, sealed bag clips*5, without humidity indicator cards or discoloration desiccants which both contain Cocl2.
FastCap 2P-10 Adhesive
Our favorite glue for PLA ! Complete Starter Kit: Includes 12 oz Activator and 2 oz Thick Adhesive, giving you everything needed for instant bonding. Fast Bonding Power: Bonds in 10 seconds and cures to 4,000 psi strength in 30 seconds when used with the included activator
Single Edge Razor Blades
- Standard single edge razor blade, 1.5” length, 0.75” width, 0.009” thickness, 100pcs blades per box, package includes 2 boxes, total 200pcs blades, fits all standard safety scrapers, razor blades, you can also use for easy cutting jobs.
Silica Gel Desiccant Beads (Reusable)
Desiccant Beads Size: VOISEN silica beads are 3-5mm in size and have a bright orange color.
Color Indication: Orange silica gel will change to Dark Green when 50-60% absorbed with moisture;
Reusable：Once desiccant beads turn dark green, can be reactivated by placing in the oven for 0.5 to 2 hours at 200 to 250F
3D Printer Filament Rack
The 7-tier vertical design provides high-capacity storage for 3D printing filaments organizes each spool visible and separated. Every tier supports up to 130 lbs, and the 3d filament rack can hold up to 84 standard 1KG filament spools
Filament Humidity Monitor
The WS-10-X4 (ws-10) includes an indoor thermo-hygrometer inside the console, and four remote thermometer-hygrometer sensors for dryer / AMS /Ace 2 mounting.
Super Lube Silicone Oil
Great all around lube for linear rods and things need light oil lubrication. Super Lube is well known in the 3D printer industry and one of most popular lubes.
Super Lube Multi-Purpose Synthetic Grease w/ Syncolon
Perfect for lead screws and the Y axis in Kobra printers. With a non-melting grease formula, Super Lube stays put without running, dripping, separating, or forming gummy deposits
Affiliate Disclaimer
Most of the links in the Raccoon Engineering Store are affiliate links. If you make a purchase through one of these links, we may earn a few cents at no additional cost to you. Those pennies help offset the cost of running this site and allow us to continue providing free technical resources, guides, and designs to the 3D printing community. Thanks for your support and patronage — every little bit helps keep the raccoons working!