0.25/0.4/0.6/0.8MM Hardened Steel Nozzles
Complete Set Contents: This set includes 4pcs nozzle for kobra x hotend, one each of 0.25 mm, 0.4 mm, 0.6 mm, and 0.8 mm, as well as four silicone sleeves and two nozzle cleaning brushes. It fully meets your needs for routine replacement and daily maintenance
2PCS Kobra X/Kobra 4 0.4mm Hotend Nozzles
Includes 2pcs assembled Kobra X hotend kit parts: high precision nozzle, throat tube, upgraded dissipation block for throat tube faster heat dissipation, extra 1pc nozzle brush for smoother printing and better 3D printed models.
4PK Nozzle for Kobra X/Kobra 4 0.25/0.4/0.6MM
Our favorite kit. One .25 nozzle, two standard .4 nozzles and one .6mm version. Includes 4 socks and replacement nozzle wiper.
0.4MM Kobra X Hotend Heating Assembly Kit Print Head Extruder for Anycubic
This is a complete Hotend Cutter Assy for the Kobra X. Everything from strain gauge to nozzle. This includes heating unit, thermocouple and even the infamous clips that get lost and broken.
JUUPINE Carbon Fiber + Diamond Pattern
Carbon fiber + diamond pattern : The diamond texture boasts a smooth surface and a matte tone, which pairs exceptionally well with silk or other gloss filaments for a remarkable effect. Meanwhile, the carbon fiber texture is notably low-key, and when combined with charcoal gray filaments, it achieves an impressive aesthetic outcome
JUUPINE Cool Plate for Kobra X and Kobra 4
Adhesion Master – No Glue Needed: The Kobra X /Kobra 4 cool plate strong surface coating ensures excellent first-layer adhesion for PLA (30–35°C) and PETG (55–65°C). Prevents warping and keeps your prints firmly in place during high-speed printing
ACE GEN2 Printhead
Complete Printhead from the Bowden Tube Upper Channel to the silicone Sock on the nozzle. Everyone with a Kobra X needs a spare.
Strain Guage for Kobra X
Auto Bed Leveling for Anycubiic Kobra-X: Replacement Parts Strain Gauge Leveler Module Sensor with Cable for Kobra X Extruder Hotend
Kobra X Upper Channel
Complete upper channel for Kobra X Printhead. Includes optical encoder wheels for upper sensors. Always check Anycubic Link below for better price. Often on Sale
Material Throwing Assembly Kobra X and Kobra 4
ANYCUBIC Material Throwing Assembly for 3D Printer, Replacement Purge Wiper Module for Clean Nozzle Starts, Compatible with Kobra X , Kobra X Combo ,Kobra 4 ,Kobra 4 Combo
Kobra X Heating Assembly Kit
This hot end heating component is compatible with Kobra X printer
Includes 1 complete heating assembly (heater + thermistor) + 3 matching screws. The kit is pre-integrated and ready to use right out of the box
M3 Socket Head Cap Self Tapping Screw
These are great replacements for the Kobra X and Kobra 4 body screws with correct head.
50pcs M 2.5 Printhead Screws
These are great replacements for the Kobra X printhead with correct size small head and allen.
Filament Cutter for Kobra-X : 4 Pack
Designed as a direct replacement filament cutter lever specifically for Anycubic Kobra X 3D printer. It matches the original factory specifications for a straightforward, drop-in installation
PTFE Teflon Tube for 1.75mm Filament
10 meters of high quality PTFE (Bowden) tube for Kobra X and Kobra 4 printers as well as ACE 2 Pro.
Affiliate Disclaimer
Most of the links in the Raccoon Engineering Store are affiliate links. If you make a purchase through one of these links, we may earn a few cents at no additional cost to you. Those pennies help offset the cost of running this site and allow us to continue providing free technical resources, guides, and designs to the 3D printing community. Thanks for your support and patronage — every little bit helps keep the raccoons working!