Kobra X and Kobra 4 Display Protector and Tool Caddy

Two bezels included in the print file so you can choose between side cutter version or non. This bezel is about 1mm thick so does not infringe on the build plate but does PROTECT the display in the event the user does not get the plate installed completely square.

Design your own !

The inserts are printed separately and locked in with a key in the back. Because of this you will be able to select which inserts you want.

Note: the side cutter pin presses in plates firmly and has access from back to drive it out if you need to replace it.

• Allen Key Storage (inserts for Kobra 4 and Kobra X)
• Spare Nozzle storage
• Utility Box
• Maintenance Brush Storage
• NSD tool Holster (see link below)
• Magnetic Screw and part holder (standard 10mm magnet)